If you’re lacking on any of those things, then it’s best to get buckets or other forms of long-term storage food. Just be sure to fill your pantries first.

It's so much easier to stay on a low carb diet when you have things to nibble on. I've been drying meatballs (cut them in half first), and they make a fantastic savory snack. I'll post to the Tried and True thread when I get a chance.

I thought an easier way to see what was happening would be to make a time lapse video of an entire freeze drying cycle. As I was about to prepare some apples for freeze drying yesterday, I thought it would be a good time to do that -- so out came the GoPro.

5. Maintenance: Understand the maintenance requirements of the machine. Some units require more frequent servicing than others.

As I've shown you, the Small Harvest Right Freeze Dryer is the most affordable freeze dryer. However, if that's not what appeals to you, I know you can't go wrong with the other models. After all, I own the large model.

Odds are the problem is the vacuum hose or its end connections, the drain valve, or the door gasket. Based upon my experience I'd double check the fittings while installed on the FDer.

I did wonder though, since this is gravity flow and not pressure driven as on a car, if having the filter mounted horizontally might result in using only "half" the filter, as the oil would tend to travel through the low side of the filter -- although in practice, I suppose, as the filter material gets plugged it would force the fluid level higher.

What I presume was happening was that condensation was building up on the cooling coils between the insulation and the chamber and freezing. When I finally turned the FDer off it took 3 days for the ice buildup to melt and slowly soak through the insulation and drip onto the counter.

The evaporator coils that touch the surface of the stainless steel vacuum chamber reach about -42 F. With food in the chamber and because the location of the thermister is on the middle shelf of the four shelves, the temperature it records is going to range from -25 to -30 F in the 9 hour default freeze time. This temperature is very adequate for freeze drying the food.

We have two freezers in the garage as well. All of these machines generate heat and humidity. Our FDer front regularly sweats up an storm and water drips off the door and from around the entire chamber perimeter down the front of the unit. It got so bad that I taped a plastic shield above the display to route the water around it. You can see the water on the door and on the stainless steel front past the 4 screws on the unit.

These advertising-free forums are provided free of charge through donations from Society website members. Anyone may read the forums, but to post you must create a free account.

So the bottom line is this: If you can afford the money, space, and time to spend on freeze-drying your own food and you believe the need for the food is many months or years away, then eventually the Harvest Right freeze dryer will pay for itself.

Harvest Right’s lyophilizer/freeze dryer is the perfect addition to any laboratory. The scientific freeze dryer can be completely customized with your preferred processes.

The system records and maintains a log of the pressure and temperature during all parts of the freeze-dry cycle.